Talurit Group strengthens its premium swager portfolio with the launch of the Talurit® 400T 1VS, an entirely new single-pillar swager engineered and built in Sweden for medium-size wire ropes. With a maximum swaging force of 400 tons (4,000 kN), it handles aluminum T-Ferrules up to size 38, UM ferrules up to size 40, sockets and terminals up to 1 1/4 in., and Flemish eye sleeves up to 1 1/8 in.

The Talurit® 400T 1VS is an entirely new single-pillar swager engineered and built in Sweden for medium-size wire ropes.

Long service life begins with the machine’s structure. The 400T 1VS is built for high strength and minimal maintenance, while its angled single-pillar body opens up the swaging area, providing ample working space for handling heavy rope assemblies.

Every Talurit® swager is engineered and manufactured at the group’s own certified facilities.

The standard FIX D Guide die holder is larger than is typical for a machine of this size, allowing a wider range of die sets and larger ferrule sizes. Its guided design absorbs the eccentric forces generated when a sleeve, end stop or terminal is repeatedly turned and swaged. These are the everyday loads that determine how a machine wears over years of production.

The 400T 1VS reflects Talurit Group’s continued investment in engineering.

Variable speed and a smart control system help keep cycle times short. The piston travels at up to 10 mm/s and gradually slows as pressure rises, reaching its minimum speed only at the full 400-ton capacity. A built-in oil cooler keeps the hydraulic oil within its optimal operating range, while an idle mode reduces noise and energy consumption between swages. A standard silencing package keeps operating noise to approximately 70 dB(A) and idle noise to just 50 dB(A). Force, speed and return distance are set on the 10-inch touchscreen, while an electric foot pedal with a “hold” position leaves both hands free to handle the wire rope.

With a maximum swaging force of 400 tons (4,000 kN), the Talurit® 400T 1VS handles aluminum T-Ferrules up to size 38, UM ferrules up to size 40, sockets and terminals up to 1 1/4 in., and Flemish eye sleeves up to 1 1/8 in.

What comes with the machine matters as much as the machine itself. Every Talurit® swager is engineered and manufactured at the group’s own certified facilities in Sweden, where its engineering team is also based. The company provides spare parts, service and application support through subsidiaries in Germany, the United Kingdom, the United States, Singapore, China and the Middle East, as well as through a global network of authorized distributors. More than 75 years of experience stands behind every machine.

Max Epplen, Area Sales Manager at Talurit GmbH, said: “For a machine of this size, its capabilities are impressive. The open single-pillar design provides excellent visibility and ample working space around the wire rope. Our engineers have done an outstanding job once again, and this is a swager I look forward to presenting to customers who value efficiency, low total cost of ownership, ergonomics and safety.”

The 400T 1VS reflects Talurit Group’s continued investment in engineering and research and development, with a focus on improving efficiency, ergonomics, safety and long-term value for customers.