{"id":11724,"date":"2023-04-21T10:27:39","date_gmt":"2023-04-21T10:27:39","guid":{"rendered":"https:\/\/www.findadistributor.com\/news\/?p=11724"},"modified":"2023-04-21T10:27:39","modified_gmt":"2023-04-21T10:27:39","slug":"amrs-in-cold-storage","status":"publish","type":"post","link":"https:\/\/www.findadistributor.com\/news\/amrs-in-cold-storage\/","title":{"rendered":"AMRs in Cold Storage"},"content":{"rendered":"

The global cold storage market size was valued at $138.97 billion in 2022 and is projected to grow at a compound annual growth rate (CAGR) of 17.2% from 2023 to 2030, reports iFollow<\/a>.<\/p>\n

Therefore, the cold chain turns to automation to meet internal productivity needs and customer expectations and that’s where mobile robots play an essential role.<\/p>\n

\u201cAutonomous Mobile Robots will contribute significantly to efficient and productive use of increasingly vital cold storage. This kind of automated solution is not a question of luxury but one of need \u201d explains Vincent Jacquemart, CEO of iFollow<\/a>.<\/em><\/p>\n

Efficiency in every way<\/strong>
\n\u2018Efficiency\u2019 here has several connotations. There is the efficient use of the available space. Many cold stores are quite small \u2013 often \u2018cold rooms\u2019 within larger buildings. But demand for cold space, from private companies\u2019 own facilities to \u2018public\u2019 stores operated by a 3PL for multiple customers, is increasing.<\/p>\n

In the food chain in particular, companies from processors to distributors and retailers are looking for larger facilities \u2013 the Cold Chain Federation (CCF) has identified 678 units of over 50,000 square feet, and there are many that are much larger still. But cold stores are expensive to build and equip, and although the CCF recently estimated that some 16.7 million square feet of new space is under construction or being fitted out, that may not meet increased demand, especially as so much of the existing stock (34%) is over 25 years old and some of this is converted, not always very effectively, from other uses.\u00a0<\/span><\/p>\n

Cold stores must also be efficient in operation, which is key at a time of gas and electricity bills rising remorselessly. Although a well-built, equipped and run cold store uses a lot less energy than is commonly supposed, there is still an imperative to improve storage density and operations to minimize the heat coming in through open doors. And contrary to popular opinion, cold chain warehousing is not usually about minimally manned, long-term, bulk storage.<\/p>\n

Many cold chains move goods in and out of stores rapidly and involve all the break-bulk, order-picking, stock rotation and other operations familiar to ambient warehousing. That has to be performed just as efficiently and productively but in much more arduous conditions.<\/p>\n

This means that labor, too, has to be deployed efficiently. In November, the Cold Chain Federation noted \u201c10 percent to 20 percent shortage rates\u201d among its members. The pool of workers prepared to perform arduous, even hazardous, tasks in cold conditions is decreasing. In addition, there is an increasing realization of the need to limit the length of time that workers spend in the cold before taking a break in warmer areas, and of the long-term impacts of heavy manual tasks in cold conditions.<\/p>\n

Overcoming technical issues<\/strong><\/p>\n

Given all this, the cold store would seem an obvious arena for the introduction of automation. But this is not without its problems. There are technical issues \u2013 operation at low, and especially sub-zero, temperatures, can embrittle and otherwise degrade materials including metals, plastics and rubber tires. Electric and electronic components can be affected by ice and condensation.<\/p>\n

Batteries, in particular, have degraded performance and shorter lives at low temperatures. Fixed mechanization, such as conveyors, takes up refrigerated space that isn\u2019t being used to store the goods. There are safety and operational issues too \u2013 it isn\u2019t easy to perform complex control operations or to ensure that people are adequately protected from machinery when workers are wearing heavy and cumbersome protective clothing and both their physical and mental agility may be compromised by the low temperatures alongside the hazards of condensation and ice.<\/p>\n

Not all AMRs can work in cold storage. iFollow<\/a>, however, has a range of robots for cold chain logistics that transport from 300 kg to 1500 kg payload down to -25\u00b0C and is specific to the cold store environment. This is due to its approach to safeguarding electronics and batteries.<\/p>\n

The temperature of key electronic components is regulated by an iFollow-developed servo system which eliminates condensation (and therefore, icing,) at temperatures as low as -25\u00b0 \u2013 a particular issue when moving regularly between cold and temperate spaces. This also means that battery life is not degraded. Depending on the size of AMR, between 12 and 18 hours of autonomous operation are available from a 2-hour charge time. Fewer battery charges or changes obviously improve productivity, but also reduce the space needed for recharging.<\/p>\n

Using AMRs rather than ride-on vehicles eliminates the known hazards of the latter \u2013 present in any warehouse operation but exacerbated in cold and slippery conditions. Specialized cold-store standard trucks are also not cheap.<\/p>\n

Operator control is also suited to cold store conditions. It is not reasonable to expect workers to input complex instructions while wearing heavy gloves or to require them to take their gloves off for extended periods. The Mycelium WCS software from iFollow<\/a>, which is compatible with all available WMS\/ERP systems, can be used through any computer or tablet with most instructions available through just one or two clicks.<\/p>\n

AMRs do not require the segregated space of conveyor-based systems and they can turn in their own footprint, unlike most AGVs which require a defined bend to corner. This maximizes storage space, or to put it another way, minimizes the volume of fresh air being refrigerated.<\/p>\n

Also unlike AGVs, AMRs do not require semi-permanent predefined pathways, thus allowing more flexible use of warehouse space. They also do not require especially smooth and even floors \u2013 an issue with some older or converted cold stores \u2013 indeed, the implementation doesn\u2019t usually require any expensive infrastructure at all.<\/p>\n

An ability for an AMR to carry two roll cages at once, to a maximum load of 1,500kg offers an advantage, particularly in the cold store environment because it reduces the number of times doors have to be opened and closed. That not only reduces energy loss and minimizes the potential for condensation, but reduces the hazard from the, typically, fast-acting cold store doors.<\/p>\n

\"\"

iFollow has a range of robots for cold chain logistics.<\/p><\/div>\n

Collaborative order picking\u00a0<\/strong><\/p>\n

The AMRs are designed with safe, collaborative use in mind. Lidar navigation prevents the vehicle from colliding with permanent fixtures, with goods left blocking aisles, or of course with the attendant workforce (who, clad in thermal headgear, may not always be aware of the traffic around them). The typical maximum speed is 1.7m\/s \u2013 a brisk walking pace \u2013 with linear and angular speeds and accelerations closely controlled.<\/p>\n

In typical order-picking use, one operator might work with two AMRs within a defined pick zone, selecting items to roll cages or destinations. The operator can receive pick-list instructions by voice terminal, RF terminal or tablet, and of course, the AMRs are simultaneously receiving their complementary movement instructions. Picking this way can yield 50% better productivity than the conventional manual approach while optimizing the picker\u2019s movements.<\/p>\n

AMRs can equally be used for the variety of shuttle movements required in the store, moving goods between locations. Through an intuitive fleet management interface, the scenario can be simply generated, and the robotic system works out the movements required.<\/p>\n

AMRs, then, can improve the efficient use of cold store space both by increasing productivity and minimizing \u2018wasted\u2019 space. The latter, along with reduced door openings, helps with energy efficiency, as does the non-degrading battery performance. The efficiency of scarce and increasingly expensive labor is maximized, and perhaps most importantly, the safety and welfare of both goods and staff are addressed. There is a clear logic in letting AMRs carry the load in cold stores.<\/p>\n

About iFollow<\/strong><\/p>\n